关于半鞅向量随机积分的两个结果

首先利用半鞅Girsanov定理与闭图像定理证明了:若{Xn}是带滤基的完备概率空间(Ω,F,F,P)中的一列半鞅,其中滤基F=(Ft)t≥0满足通常条件,且{Xn}在关于P的Emery拓扑空间中收敛于X,则当概率测度Q相似文献   

Analysis of some critical aspects in hot machining of Ti-5553 superalloy: Experimental and FE analysis

In this study, a newly developed titanium superalloy, i.e., the Ti-5553 alloy has used for hot machining. This material replaced Ti-grade-5 alloy in the application of aerospace, automobile, and biomedical sector. However, similar to Ti-grade-5 alloy, the Ti-5553 alloy has a low thermal conductivity which makes it difficult-to-cut material categories hence, high tool wear, cutting force and bad surface finish. Hot machining of Ti-5553 has been studied at different machining condition (room and hot) using Deform-2D finite element analysis. The result from the simulation test was compared with the experimental value and reduction of cutting and thrust forces was observed. The experiment was carried out with the same input parameters as simulation, and good coherence between them observed. Additionally, cutting zone temperature, effective stress, etc. for both room and elevated the temperature are also discussed.     

适用于北斗混合星座的相对定位随机模型建模策略

为提高模糊度解算成功率和基线解精度,提出适用于北斗的相对定位随机模型建模策略,即混合随机建模策略。采用最小二乘方差分量估计方法对北斗单差观测量方差进行估计。对处于不同高度的三轨道卫星观测量方差分别建模:对地球静止轨道卫星观测量方差采用载噪比模型建模,对倾斜地球同步轨道卫星和中地球轨道卫星观测量方差均采用仰角模型建模。根据不同模型实时组建观测量的随机模型。试验结果表明:相比于采用传统简化模型和单一的仰角或载噪比模型,混合随机模型能更加真实地反映不同卫星观测量的随机噪声特性,模糊度解算成功率和相对定位精度均有提高,总体性能最优,因而能更好地适用于北斗系统。     

高精度有限体积格式在三维曲线坐标系下的应用

为了构造在光滑区具有较高分辨率并且可以无振荡捕捉激波的高精度有限体积格式,同时降低格式在模板选择上遇到的困难,基于逐维重构方法,发展了结构网格下的高精度有限体积格式,并将这一格式推广到三维曲线坐标系下,从而可以适应相对复杂外形下的计算。为充分验证格式的有效性,选取一系列典型算例进行计算:在等熵涡输运和二维喷管流动中验证了格式的精度可以达到设计精度;在双马赫反射问题中格式也表现出良好的捕捉激波的能力。数值计算表明,上述格式在曲线网格上具有较高的数值精度和鲁棒的激波捕捉能力,适用于流体力学方程的计算。     

Application of Markov renewal theory and semi-Markov decision processes in maintenance modeling and optimization of multi-unit systems

In this paper, a condition-based maintenance model for a multi-unit production system is proposed and analyzed using Markov renewal theory. The units of the system are subject to gradual deterioration, and the gradual deterioration process of each unit is described by a three-state continuous time homogeneous Markov chain with two working states and a failure state. The production rate of the system is influenced by the deterioration process and the demand is constant. The states of the units are observable through regular inspections and the decision to perform maintenance depends on the number of units in each state. The objective is to obtain the steady-state characteristics and the formula for the long-run average cost for the controlled system. The optimal policy is obtained using a dynamic programming algorithm. The result is validated using a semi-Markov decision process formulation and the policy iteration algorithm. Moreover, an analytical expression is obtained for the calculation of the mean time to initiate maintenance using the first passage time theory.     

对称螺杆流量计转子热变形的综合分析

利用有限元理论对８０ｍｍ口径的对称螺杆流量计转子的热变形进行了综合分析．整个计算程序分为平衡和非平衡两套系统．通过计算转子的热变形,推导出热变形对转子泄漏和运转等方面的影响．最后得出对生产有指导意义的具体数值和具体方法．     

实施精品战略 锻造品牌期刊

期刊的传统风格特色是创办品牌、名牌期刊的基础,是其构成要素的一部分。要将期刊办成品牌期刊、名牌期刊,就必须把它过去的风格特色继承下来、传承下去,这是实施精品战略,锻造品牌期刊的基础和前提。论述了品牌期刊的价值构成及要素,并对如何培育锻造品牌期刊作了一些有益的探讨。     

Attrition through a partially coordinated area defense

An area defense consists of several groups that act independently, i.e., do not communicate with each other. Each group has a fixed number of defenders and a controller that allocates these defenders optimally against the individual attackers comprising an attack. We analyze the effectiveness of this partially coordinated defense against a simultaneous attack of known size in which all attackers are considered to be equally lethal. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

A continuous‐time strategic capacity planning model

Capacity planning decisions affect a significant portion of future revenue. In the semiconductor industry, they need to be made in the presence of both highly volatile demand and long capacity installation lead‐times. In contrast to traditional discrete‐time models, we present a continuous‐time stochastic programming model for multiple resource types and product families. We show how this approach can solve capacity planning problems of reasonable size and complexity with provable efficiency. This is achieved by an application of the divide‐and‐conquer algorithm, convexity, submodularity, and the open‐pit mining problem. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

定常态不可逆卡诺热机面积特性

对定常态不可逆卡诺热机进行了有限时间热力学分析.定义了功率、效率和面积比系数,并导出三者的关系式,由此对热机最佳功率、效率和面积特性进行了分析和讨论,给出了一些有益的结论.